Chromatography Autosampler Vial Inserts
Chemglass Life Sciences Polypropylene Insert, 0.25mL, BM, No Spring
Polypropylene Insert, 0.25mL, BM, No Spring. Due to the conical design of the snap plug, limited volume inserts used in the shell vial stay centered and straight allowing for easy sample removal.
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 700ul fill volume with a conical, precision point and 8x40mm outer dimensions with plastic spring attached. For use in 4ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a precision point conical tip for excellent recovery of sample. Residual volume is 8ul with most autosamplers with a 500ul useable volume. Polypropylene springs are attached to keep the inserts center aligned and reduce chances of the needle breaking the inserts during use. This product is manufactured in an ISO 9001:2015 Certified facility. Use with 4ml, 13mm, Screw Top, 15x45mm autosampler vials.
Ace Glass, Inc. PTFE insert, 1/2" NPT, #7 compression fitting6.5 to 7mm OD tubing
Compression fitting PTFE inserts for 1/2NPT to #7 Ace-Thred. Fits 6.5 to 7mm O.D. tubing. For use with ACE PTFE reaction vessel heads.
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 350ul fill volume with a flat bottom and 6x31mm outer dimensions. For use in 2ml autosampler vials. 1000/CS.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a flat bottom. Residual volume is 6ul with most autosamplers. This product is manufactured in an ISO 9001:2015 Certified facility. Use with 9mm Screw Top or 11mm Snap Top 2ml, 12x32mm autosampler vials. Lower cost for budget minded laboratories.
Microsolv Technology Corporation Inserts, in Racks. Includes 96, Clear, 500ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 18/CS.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System. These Inserts have a wide conical point for fast sample filling which minimizes bubble formation. Preloaded in Racks.
FILTROUS INC 250UL 9-425 CLEAR FUSED INSERT
250uL 9-425 Clear Screw Top Fused Insert Autosampler Vials - Filtrous
Waters Corp Deactivated Glass Insert, 200 μL Volume, Borosilicate Glass
The Deactivated Glass Insert is a reusable tool designed for sample preparation applications. It has a 200 μL capacity and is made from high-quality borosilicate glass, offering resistance to breakage and contamination. The insert undergoes a deactivation process through heat treatment to remove active sites that could adsorb analytes, aiming for accurate and reliable results.
- Volume capacity of 200 μL
- Crafted from high-quality borosilicate glass
- Deactivation process minimizes analyte adsorption
- Designed for easy cleaning and multiple uses
- Exceptional resistance to breakage and contamination
- Fits most standard 2 mL autosampler vials
- Minimizes sample loss and enhances reproducibility in chromatographic runs
- Suitable for liquid chromatography, gas chromatography, and mass spectrometry
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 350ul fill volume with a flat bottom and 6x31mm outer dimensions. For use in 2ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a flat bottom. Residual volume is 6ul with most autosamplers. This product is manufactured in an ISO 9001:2015 Certified facility. Use with 9mm Screw Top or 11mm Snap Top 2ml, 12x32mm autosampler vials. Lower cost for budget minded laboratories.
Microsolv Technology Corporation Inserts, in Racks with a Base. Includes 96, Clear, 1000ul Glass Low Volume Precision Inserts with wide conical points. For use in the Micro-Sample Management System. 1 EA.
Inserts are 1st Hydrolytic, Class A, TYPE 33 Borosilicate Glass made for use with the U-2D Micro-Sample Management System, Pre-Loaded in a Rack with a Base. These 1ml Inserts have a wide conical point for fast sample filling to minimize bubble formation and have outer dimensions of 7.72mm x 44.85mm. Sealing Film or Mats sold separately.
Waters Corp Waters Low Volume Insert, Clear Glass, 250 μL, 4 mL Vial Compatible
Vial inserts are used in applications with limited sample volume. This clear glass low volume insert has a 250 μL capacity and is designed for use with 4 mL screw cap vials.
- Designed for applications with limited sample volume.
- Has a 250 μL capacity.
- Made from clear glass.
- Compatible with 4 mL screw cap vials.
- Packaged with 144 units per package.
- Requires a spring for centering within the vial (sold separately).
Microsolv Technology Corporation Inserts, Low Volume for Vials, Glass. Clear, Deactivated, 200ul fill volume with a conical, precision point and 5x32mm outer dimensions with plastic spring attached. For use in 8mm, Push Top, 1ml autosampler vials. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features a precision point conical tip for maximum recovery of sample. Residual volume is 2ul with most autosamplers.Polypropylene springs are attached to keep the inserts center aligned and reduce chances of the needle breaking the inserts during use. This product is manufactured in an ISO 9001:2015 Certified facility. Can be used with 8x40mm, "96 position" vials.